S&S Headers for turbo project???

[bigdaddeywalt]

Hey guys I was wondering whether anybody knows ( maybe you jibby) if the S&S headers will work good for turbo headers, you know flipping them around as in a clearance issue towards the front since they are so short. Ive seen a couple of people using the SS Autochroma tundra headers but it might be too big for me, any help would be appreciated. Thanks in advance fellas

 

[JBrady]

Sorry, they will not fit reversed. You could possibly order a set unwelded and uncoated and use part of them.

 

[bigdaddeywalt]

Thank for the reply JBrady

 

[Lextreme II]

I think it will.. just cut the flange off where the 2 in 1 joint. From there you need to weld another 2.5" to the turbo..

 

[bigdaddeywalt]

Thanks Lextreme, my only concern I beleive will be on the passenger side whether it will hit the alternator or clear the alternator, because i know the stock SC400 headers on the passenger side when i flip it to use as a turbo manifold it hits the alternator.