kc95sc400
New Member
- Messages
- 524
- Location
- Charlotte, NC
Wired this for my car but have made a new custom loom for my new motor, elimated the ECU plugs all together.
This was wired for my setup on my 95 SC400. This may need some re-wiring depending on you setup of course. It's a bit long but will fit under the stock ECU cover.
The ECU side connector is the same as the SC400 and I think Supras as well that use the 40-40-40 connector.
$100 and I'm pretty firm at this point.
I can also send you an Excel file with a pretty much complete diagram of the harness.
Thanks for looking.
see pic here- http://www.lextreme.com/forums/showthread.php?t=13392
KC
This was wired for my setup on my 95 SC400. This may need some re-wiring depending on you setup of course. It's a bit long but will fit under the stock ECU cover.
The ECU side connector is the same as the SC400 and I think Supras as well that use the 40-40-40 connector.
$100 and I'm pretty firm at this point.
I can also send you an Excel file with a pretty much complete diagram of the harness.
Thanks for looking.
see pic here- http://www.lextreme.com/forums/showthread.php?t=13392
KC