Will these fit the 1UZ

[-Nemesis-]

Sick to death of my leaking header flanges, and found this gasket brand/technology that looks promising.

http://www.remflex.com/exclusive_features.htm#About_Remflex

Anyways they only list a version for the 2UZ. Will these fit the 1UZ properly?

http://catalog.remflex.com/TOYOTA_Header_Exhaust_Manifold_Gasket_p/rf7011.htm



Probably should have put this in the exhaust section, but it does say 'Gaskets' here!

 

[XR8tt]

I have had NO issues with Copper silicon on steel or copper gaskets..
http://www.acehardware.com/sm-perma...mp-rtv-silicone-gasket-101br--pi-1295860.html
Its often deflection with heat that causes leaks etc..
Or bolts loosening off.. I find a 12mm tube extending nut away from heat helps and bigger holes on outer flange plate..
The guys on www.theturboforums.com use copper silicon only.. NO gaskets..

 

[-Nemesis-]

I had tried that copper stuff before, when the flanges were warped (long story - discovered after)

Would I be better running it without the MLS standard gaskets? They've all seperated and are not in great nick, so I'd imagine i'd have to silicone between them all too

Turns out that mob above want US$100 to ship $40 gaskets, so that's a no go.

 

[XR8tt]

Try runing the primary inside the exhaust port alittle if you have issues..
Could carefully tig some stainless on inside of flange???