can i use the 1uz plug to fit my 7mge injectors?

[DenZel]

hey guys just wondering..i can get 10 or so 7mge injectors - though some other missing the plugs/connecters - so they just the injector themself.

can i simply use the plugs from my 1uz loom? are they are a straight on swap?

yes iv read the write-ups just would like to confirm


thankyou.

 

[gloverman]

Yes the 1uz and 7m have the same plug. Cheers

 

[DenZel]

so the 1uz plug can click on the a 7m injector? so i can use the 8 of them from my exisiting loom?? as only half the injectors im buying have the plugs on top..

 

[toyauto]

Injector plug

If u are using 440 black top
The plug on has a different alignment key so 1 uz will not push on
I filled the plastic guide off the injector and then the 1UZ plug will push on
works fine on mine

 

[gloverman]

Thats interesting - Maybe different years have slightly different tabs as the black tops on one of my jobs worked fine - straight on. If needed file the tabs off - cheers

 

[toyauto]

injector plug

The black top is a low impediance injector so plug stops u fitting it to a standard computer and burning out the injector driver
I think yellow is also lo
green is a hi impediance and plug should go straight on
I am running a bank of 8 x 4.7 ohm 25 watt resisters on my link plus to suit drivers

 

[DenZel]

using the green 315cc injectors

 

[toyauto]

Greens a go

Should be same plug then
Have u modifyed engine to need the extra fuel?

 

[cjsupra90]

using the green 315cc injectors

Yes, the Green top 315's are High Imp. and have the same plug as the stock Lex. units and thus are a plug and play ordeal.....

 

[DenZel]

yeh i have the adaptronic ecu, just making sure i could use the 8 plugs from my exisiting loom with the bare 7m injectors

cheers.

 

[DenZel]

just one other thing,...just received my injectors today

and on the opposite side of the green tips....at the bottom you have the black circle rubber seals, but not all have them?

is this an issue?? what are these needed for?

 

[toyauto]

injector seals

yes the seals are a must
stops air coming in and fuel spray going out
U can use the ones on 1uz if are in good condition
check the edges are clean and not damaged
If not fitted correctly will have small fuel leak from that area

 

[DenZel]

these get changed when serviced anyway?