RedPhoenix
New Member
- Messages
- 505
- Location
- Palm Harbor, FL
Hello everyone. I thought I would throw up a project log of my manual conversion. Its going to be a little slow, but Jake is going to guide me in every way possible to get the ball rolling.
So here is my list of what I need for this project... ( I will update this list if anything changes )
Transmission - 1995 Supra MK4 W58
Adapter Plate - UZA70 Aluminum W58>1UZ
Flywheel - UZA70 Aluminum
Clutch Kit - UZA70 Sprung 6 puck
Throwout Bearing - Howe Racing 82870
Pedals - Supra MK3
Hydro Lines - SS Lines with speed bleeders
Shifter - Short Throw shifter
Driveshaft - Custom modded SC400 or Manual SC300
Mount - may be able to use stock or slightly modify it.
So here is my list of what I need for this project... ( I will update this list if anything changes )
Transmission - 1995 Supra MK4 W58
Adapter Plate - UZA70 Aluminum W58>1UZ
Flywheel - UZA70 Aluminum
Clutch Kit - UZA70 Sprung 6 puck
Throwout Bearing - Howe Racing 82870
Pedals - Supra MK3
Hydro Lines - SS Lines with speed bleeders
Shifter - Short Throw shifter
Driveshaft - Custom modded SC400 or Manual SC300
Mount - may be able to use stock or slightly modify it.