I'm the 1st to post in the uk section!

The 1UZFE EGR Delete Kit is available for sale here.
i may have one from a soarer mate, you have any ecu numbers i can check it against ?


All I know is the engine is from a LS400 and something about a 3 plug like the supra?

It seems like if its after 92 it should work as there are no different.
 
Last edited:
Oh, i also had some blanking plates for the EGR made at work:

http://img.photobucket.com/albums/v428/George106xsi/2012-04-25184142.jpg

I ended up having an extra set made as they were 4mm and i asked for 3mm so if anyone wants them give me a shout.

Once ive got the engine in and running im going to look at blanking the actual valve itself and will make a plate for that too, so again if anyones interested im sure i could get some spares made.
 
I just dropped my engine in its hitting on the brake pipes and clutch at the mo but i think i'm going to rip all that out and fit a pedal box with fake floor

Maccy: interested to see what your mounts were like and how close the engine is to the firewall if you wouldn't mind showing me?
 
Last edited:
Hi guys,

Just spotted this. Ex-pat across the water.
Dying with flu at the mo so have a chance to properly trawl the site.
Remember just because it;s a Japanese engine don't mean the body has to be.
DSCF0975-a.jpg
 
Hi guys, not really new to the forum but just found this!

1UZ powered TR7 here ......one day! Just last week met a guy putting the same in a race SD1 only 4 miles from me so at least 2 of us near Scotch Corner.
 


Top