just completed the w58 swap this weekend in my sc400.had a few issues. one is my throw out sounds like it had shredded or is about to only after 20 miles or so.
Are you supposed to re-use the flexplate spacer behind the flywheel? i have searched everywhere and cant find info on this.Im running the 1uzfeswapkit flywheel and t56 throw out bearing set up. i am replacing the throw out this weekend with another oreilly's unit this sunday.
Also theres an engine vibration issue.easy fix.the engine vibration may be the clutch its the ebay xtd stage 3 clutch which i plan on replacing with an autozone special to eleminate it from the equasion.
I guess the only question was about the spacer.
Are you supposed to re-use the flexplate spacer behind the flywheel? i have searched everywhere and cant find info on this.Im running the 1uzfeswapkit flywheel and t56 throw out bearing set up. i am replacing the throw out this weekend with another oreilly's unit this sunday.
Also theres an engine vibration issue.easy fix.the engine vibration may be the clutch its the ebay xtd stage 3 clutch which i plan on replacing with an autozone special to eleminate it from the equasion.
I guess the only question was about the spacer.
Last edited: