Price Breakdown Comparisson for Different Tranny's onto the 1UZ-FE

The 1UZFE EGR Delete Kit is available for sale here.

BARRY

New Member
Messages
163
Location
Silicon Valley, CA
can someone aid in providing a price breakdown for different transmission configurations that one could use for the 1UZ-FE, so we have a parts plus price reference!

i could throw together a short list, but being as not yet done any of the swaps, i wouldn't know if i was missing parts on the list.

i ask because Supra boys are using TH400's...
i bought the TTC adapter plate and want to use a v160, but as much as i would like to, cost of doing so will be very high and i'm now leaning towards going the W58 route, but yet i don't know how much price difference there will be.

can anybody shine some light on this subject?
 
Prices in AUD

W5x between $50 and $500 (depending on model and year)
Flywheel $250-$400
Bellhousing $350-$500
Clutch $250-$500

R154 - $900-$1500 (depending on MA70 vs JZZ30/JZX100)

V160 - $3000ish
 
estimations goes...

v160 = 1,600-2,500
clutch & flywheel = 1,200 - 2,000
driveshaft = 500

w58 = 100 - 500
flywheel = 250
clutch = 200
driveshaft = 100 - 500
 
estimations goes...

v160 = 1,600-2,500
clutch & flywheel = 1,200 - 2,000
driveshaft = 500

w58 = 100 - 500
flywheel = 250
clutch = 200
driveshaft = 100 - 500
What about ECU?

ECU at least 1000
Installation $500
Tune $1000

We calculated its about $10,000 if you are not mechanically incline.
 
ecu, install, and tune is not a problem. i do those already.

TH400's go for $800-$1200 range it seems?
 

Attachments

  • engbay.JPG
    engbay.JPG
    120 KB · Views: 63
yeah standalone is only needed if you build the engine or do extensive modifications that the factory computer can no longer support the engine.

bansheebuzz, whats the specs on your setup?
 


Top