Parts 92 4runner/surf -> 1UZ conversion parts

[Glen75]

Sold Sold Sold

 

[Muzza_NZ]

Damn, sorry to hear that mate.

Are you going to pick another vehicle to modify instead?

 

[Glen75]

Damn, sorry to hear that mate.

Are you going to pick another vehicle to modify instead?

Sure will, not 100% what to put the motor into yet:shrug:

I also have a Vtec powered mini project underway

 

[Glen75]

Deposit taken.

PWR radiator still available.

 

[Clown Boy]

Looks like i may have to part out my 95% finished 92 surf (4runner/hilux 4wdIFS) 1UZ conversion parts
I have the following bits
-Engine mounts (cost $250)
-New PWR radiator (cost $600)
-Teflon braided PS lines (cost $140)
-4WD 4spd auto with 1UZ bellhousing/input shaft/oil pump-Includes modified shifter linkage and transfer case shifter so they come up in the std position. comes with transfer case etc (cost $800)
-Modified G/box mount (30mm higher and 30mm further forward) (cost $75)
-Tailshafts (front and rear) (Cost $450)
-50mm alloy body lift and bolts (65mm dia) (Cost$150)
-Exhaust std tube headers/twin majic cats/twin 2 1/2" /twin mufflers/into single 3 1/2"/ muffler (cost $1250)

I'd rather sell it complete atm, and i'm taking offers for now.
It is still all in the car, so can be viewed all set-up.
I'm on the Gold coast
[email protected]

Reason for selling, i purchased the car as a repairable write off, i did the whole conversion and was about to have the WOVI done and i found it is was actually a "statutory" write off

.....

Does not include motor etc

just checkig