polyurethane diff ear mounts

[xspsi6]

I just finished the polyurathane diff ear mount bushings!!

I had these made up for my sc400 as I did not want solid as I intend to drive my car on long trips and since there was nobody that offered some I spent the money to have them made and a mold poured etc so needless to say they cost me a pretty penny however now I have poly 95a durometer bushings

Yes I over paid for what they are but I am anal about the mods I do and I could not settle for something I did not really want and I plan to sell the extra sets off on e-bay to help recoupe some of the money I spent on the molds etc etc.

Also I have not yet test fitted them in my car but plan to do say Monday but I hacked an ear off a salavege yard diff to help fitment along the way so I will report back mondayish with real world results.

 

[4U2QUIK]

nice work, what did this sset you back? about 800$?

 

[xspsi6]

Thanks. All said and done there is about 690.00 in them but the extras are to offset the cost some so i should be in them for a couple hundred by the time its all done.

 

[4U2QUIK]

nice.......

 

[BlackUZZ31]

did you get the back ones done too?

 

[xspsi6]

No real need to do the back ones plus they are really not possible to do in poly.

The ears are where all the movement/flex comes from that causes wheel hop so this will do the job and do it well

 

[xspsi6]

Ok I got them installed and WOW!, What a difference they make!
Wheel hop is gone and squish from the soft stock rubber is gone as well which made the car far far more predictable so I would say this was worth all the effort!

I am super pleased with this mod
On to the pics....

 

[xspsi6]

We just installed a set in a 800+ whp supra and the owner was very happy with the results!

 

[Man4God]

Had something similar to this (Delrin though) in my 99 Cobra. It was an amazing transformation to the vehicle. The kit I used had aluminum bushings for the diff though. Delrin everywhere else.