no power???????????????

[hiluxmad]

for some reason the ecu wont trigger the fuel pump outputs and there doesnt seem to be any power to other parts afm, ignitors, coils and poss more that i havent found yet but its all hooked up as it should be according to kdogs diagrams and zuffens write up. any ideas guys im stumped i know it has to be somthing simple. BTW it will crank fine but no fire coz no fuel pump. 5volt out put seems to be working. is there a wire ive forgotten or missed?mfg:

 

[Muzza_NZ]

Hiluxmad,
someone correct me if I'm wrong, but there is a common 12V wire that will need to be connected to your ignition - you'll see it on Kdogs diagrams coming off the ignitors and injectors - just pull a plug on an ignitor and look for the black and orange wire - then bell it out on the main loom.

Muzz

 

[hiluxmad]

does this have to go to start trigger or "on" live?
also black/pink on ecu is this start trigger?

 

[hiluxmad]

is trere a failsafe some where that is causing this? what sends the signal from starter to ecu that it is cranking? would having no radiatoor/no water cause this? oil pressure? BTW 131 crown. any way to test ecu to ensure not damaged?