Looking for EGR Delete instructions/tutorial

[Ratatat]

Have the kit, need info on what goes, what stays, what gets rerouted, and where resister goes. thanks

 

[spf_lexus]

easy... rip out everything thats attached to the 3 vacuum lines on the TB.
Track the 3 back to their origions until you have nothing attached... its pretty much everything on the driver side thats vacuum related.
Keep the PCV valve but u dont need to reroute the line on top (breather).
The water line thats routed in/out of the egr opening gets extended strait through w/ a 4'' vacuum line. the resister is easy.... I didnt have instructions either and I just stuck it in a plug thats in the general area until i got the right one... there's only 2 of them so its not that hard.
Also it doesnt matter which end goes where just fit each 10k resistor in the pinholes

 

[Lextreme II]

I hope this will help.