Lextreme II
Active Member
My engine builder think my car has a lean miss. He thinks one of my injector/s (perhaps the plug or the wire) is not working and creating a miss. My injectors were cleaned and balanced not too long ago. However, when I change my head gaskets last few weeks ago, JamesN and I noticed there was a broken injector plug. We temporary superclue the plug back. Its also funny to say, the gasket that was blown is the exact same cylinder. I am going to change out the complete set of injector plugs.
Before I do that. Is any way to test the injectors function with the car itself? My engine builder suggested using some WD40 and spray into the injector seal and see if the WD40 being suck into the engine.
Before I do that. Is any way to test the injectors function with the car itself? My engine builder suggested using some WD40 and spray into the injector seal and see if the WD40 being suck into the engine.
