Has anyone used E-Machineshop?

[quadcam boat]

I am thinking of using E-Machine Shop to do some save some time on Fabrication.

www.emachineshop.com

Has anyone used them or know anything about them?
Are they expensive or Cheap.

I would have to get them to post to Australia, so that may blow the cost out of the water.
Is there anyone in Australia that offers small scale, CNC machining services and software to use?
Thanks,
Andrew.

 

[toyotav8boat]

cnc

andrew

we use a small cnc guy in sydney for our repetition machining
he is reasonably priced
they nearly all use the program autocad
what sort of quantities ?

peter

 

[quadcam boat]

Peter,
I would like to uhave a talk to you about machining. Can you send me a PM (private message) with your phone no. and a suitable time and I will give you a ring.
Thanks,
Andrew.

 

[Nath]

I have Emachine program and think it's pretty good.

The concept is really good.
The link below is from a guy in the U.S. building a Hot Rod. He used e machine shop but sent the file to his local machinest to make the piece. His link and write up is below.
Nath

http://www.project33.com/article.cfm?ID=795