ozvenom
New Member
Billet or just newly cast!!
They are newly cast blanks which are then ground to your specification it is just a term used to describe new cams as billet though there are steel billet cams made but the kelfords are cast from original cams with blanks lobes.
I have fitted a set of kelford cams the only mods i had to make was to grind out the drive gear on 2 of the cams and relive the cyl head a bit so the cam would turn wich was only 2 lobes. which needed clearancing. They have been running now for about 4 months and i have checked all the clearances had to change 2 shims just to close up the clearance a bit. It is the best sounding N/a 1uz i have ever herd live side pipe and 8 t/bodyswhat more can you do it is automotive art (only my opinion) have a look>
REgards oz.
They are newly cast blanks which are then ground to your specification it is just a term used to describe new cams as billet though there are steel billet cams made but the kelfords are cast from original cams with blanks lobes.
I have fitted a set of kelford cams the only mods i had to make was to grind out the drive gear on 2 of the cams and relive the cyl head a bit so the cam would turn wich was only 2 lobes. which needed clearancing. They have been running now for about 4 months and i have checked all the clearances had to change 2 shims just to close up the clearance a bit. It is the best sounding N/a 1uz i have ever herd live side pipe and 8 t/bodyswhat more can you do it is automotive art (only my opinion) have a look>
REgards oz.