97 SC400 transmision wiring experts HELP!

[scotturnot]

OK, Looking at the transmision thats coming out there is a lot of wires on it. I know the three wire plug is speedometer, but past that what the heck is all the extra stuff? I was wonering if anbody has the pin outs? The six speed just has a speedometer sensor and a 2 wire reverse light (I presume thats what it is).
So supposing I can identify which pins do the reverse, what do I do with everything else? I know there is also somthing that need jumpered to allow the car to start but I dont know which.
Any help would be great.
Schematics?
Pin outs?

 

[Blizzy]

Scott, you might give Neil Griffiths an email down in OZ: [email protected]

He has made manual V8 Soarers on a number of occassions. I am sure he knows more than anyone alive about this very issue.

 

[Lextreme II]

Kdog and other senior moderators should know.

 

[Dr Tweak]

Scott,

I got your PM. I should be able to help. What exactly are you trying to do?

-Doc

 

[Lextreme II]

The doctor came to the rescue....

 

[sideshow]

red/black
red/b;ue is commony used for revers in and out

black
black/while is usually for inhibitor start so join to gether


all above wires can be found on the inhibitor plug drivers side 1/3 way dont box

 

[Lextreme II]

Scott,

Is it normal to modify TTC V160 plate to mate with the SC400? Why do u have to do that?

 

[scotturnot]

I am not sure what you mean by the TTC plate, are you talking the adaptor plate?