4.0L VVTi swap into Lexus SC400?

The 1UZFE EGR Delete Kit is available for sale here.
Here's some things to consider with this swap:

Different sumps - here's a thread showing the 3 different sumps: http://lextreme.com///forums/showthread.php?t=6497&highlight=sump

Different wiring harness connectors to the ECU

Perhaps totally different generation engines, depending on the year of your SC400. If it is earlier than 1998, get ready for a challenge, because it has a non-VVTi motor and your 2000 GS motor is definitely VVTi.
 
Any problems associated with swapping in a 2000 4.0L V8 from a GS400 into a SC400?
As John mentioned you would to GS400 ECU and throttle body cables. I am not sure about the transmission and ECU. The GS400 have 5 speed (I think)

Engine mounts are the same are they not?
Engine mounts are the same but like John stated you would need the orginal oil pick and pan

Any tutorials?
You do one.... and we will give you some freebies in exchange for your documentation.
 
the trannys are different on how they work internally
you cannot run the old tranny on new ecu it will go like **** and not change properly

but yr biggest prob is the vvti if its very late model has security in the ecu
so u need the ecu and matching key and transponder and associated **** under dash from same car

i think even david copperfield couldnt do it in 2 days hehe
 


Top