DirtyOldMan
New Member
- Messages
- 14
- Location
- Sac
ive replaced a timing belt before on a 1uz, but this one...a head ache.
I got everything off but the belt it self.
I belive the belt jumped a tooth or a few when removing so the cam gears dont line up.
Question: If i get the main crank pully set to "0",take off the belt can i just spin the cam gears by hand to line up correctly then install the belt?
I got everything off but the belt it self.
I belive the belt jumped a tooth or a few when removing so the cam gears dont line up.
Question: If i get the main crank pully set to "0",take off the belt can i just spin the cam gears by hand to line up correctly then install the belt?