Parts 1UZ heads with Kelford cams, valve springs etc

[CHe]

Item: 1UZ heads with Kelford cams, valve springs etc

Location: Hobart

- 4x Kelford 207-C Camshaft from the CamShaftShop.com http://www.camshaftshop.com/home?pa...ftshop_view.tpl&product_id=993&category_id=69
- 32x Kelford KVS1UZ Valve Springs from the CamShaftShop.com http://www.camshaftshop.com/homepag...ftshop_view.tpl&product_id=993&category_id=69
- Professional installed by Toyospec (Toyota specialist in Hobart, Tasmania)and 32 new shims installed when fitted
- Cams and spings cost me around 1900 including delivery tax and more that 600 to install and shims, etc
- Cam covers with modified vent holes and restrictors removed

Reason for selling: new project, my 1uz bottom end needs rebuilding

Price and price conditions: $1250 ono + shipping

 

[CHe]

 

['00_taco]

have these heads been ported??

 

[Zuffen]

You do realise the shims will need re-doing when the heads are re-installed.

I'd be very surprised if more than half go back in the original spots.

The $600.00 is out the window once the cams are removed.

 

['00_taco]

No reason to remove the cams this post is the heads with the cams installed correct?

 

[Zuffen]

No you can't unbolt the heads without removing the cams.

All four cams!

 

['00_taco]

gotcha, thanks.

still wondering if the heads have had any porting done??

 

[kc95sc400]

These still availavle???

KC