Parts Cast alloy rear drop sumps

[Sudsy]

Well they have been a long time coming but finally have them sorted. I have one left at this price then will have more as soon as they come back from the foundry but they will be $850 AU plus shipping. They will also have the oil pickup and all mounting bolts supplied. http://www.ebay.com.au/itm/182288265545?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

 

[Sudsy]

I also have the rocker cover inserts available and will have trans pans soon.

 

[hp1050]

What is the demonsion top to bottom I am looking for more clearance.

 

[melvinmelvin]

What kind of alloy?

As above, I'd also like to know how far it extends down from the engine block.

 

[Sudsy]

They are cast alloy then heat treated. 175mm from the base of the block to the bottom of the pan, You can gain about 10 or 12mm by machining off the fins or alternatively cut a slice out and re-weld

 

[melvinmelvin]

Thanks for the measure.

But what kind of alloy? Alloy of which metals/substances?

 

[Sudsy]

Cast Aluminium

Thanks for the measure.

But what kind of alloy? Alloy of which metals/substances?

 

[stevieg]

Cast Aluminium

He's asking what grade of aluminum was used for the casting as there are many

 

[Sudsy]

Not sure of the actual grade but it machines up like 5083 or 6061 when it's heat treated