UZZ31 Basic ECU Wiring

[ugp]

I've been trying to find the basic wiring for the above. Its about to go into a Supra however I want to fire it up on the engine stand first. Does anyone have a basic wiring diagram to get this fired up?

Thanks in advance.

Ben

 

[Zuffen]

Have you looked through this section of the Forum?

http://www.lextreme.com/forums/forumdisplay.php?f=60

 

[ugp]

I have. I've spent the last 3 days looking for one on here . I find quite a few references to a diagram by the user lextreme, when you click the link its not attached to the post anymore.

I just need to know which wires (bare minimum) need connecting for the thing to fire up. I'm unable to find a cutdown diagram link that (probaly me acting blind!)

 

[gloverman]

connect all the black yellow , black red and black orange. They are not hard. Cheers

 

[Bushwhacker]

And ground the brown and white/black wires.

 

[ugp]

So am I right in saying +12v to all the black yellow , black red and black orange;

And ground all brown + white and black wires?

Assuming then its just a case of +12 to the starter relay to crank it over?

 

[Bushwhacker]

So am I right in saying +12v to all the black yellow , black red and black orange;

And ground all brown + white and black wires?

Assuming then its just a case of +12 to the starter relay to crank it over?

You got it.

 

[ugp]

Will give that a shot. Thanks guys.