soarer 1uzfe japan version swap into sc400 usa edition

[xupd26jor]

Hi guys i have a 92 sc400 with alot miles and engine problems ( missing fire , some times shut off by self and hard to start , oil leaks ) i make the decision to get a low millage engine from japan (engine ,harness and ecm), after recive the engine i find out the harness conectors and ecm are diferent , the japan ecm # 89661-50092 , the original ecm# 89661-24230 guys just i need if you know how to do the wiring or where i can get the ecm pinout of both ecm , help helppppppppppppppppppppp!!!!!!!!!! please ! thanks and have a good day !!!!!!!!!!!!!

 

[sideshow]

cant u just swap the motor over and use the existing wiring and ecu
check if injectors are similar flow then u dont have to change them

 

[sideshow]

another thing is remember one is left hand drive and the other right habd drive
so looms might be on opposite sides