Iv heard of using propane injection on a deisel before but would it work on a gas motor too? Some one on another forum responed to a post i made saying
"Direct port Nitrous is safer than fogging, without a doubt. However, by running propane as the fuel add to nitrous, it becomes very safe and effecient as a fogging application. Its the only way I go, and Ive been running Nitrous for over 20 years. Propane is 114 octane, and no chance of a puddle. You can dial in your A/F mixture with the turn of a screw" And they then showed pix of both there SRT-10 Viper and Lamborgini 6.0 on nitrous with a propane tank.
"Direct port Nitrous is safer than fogging, without a doubt. However, by running propane as the fuel add to nitrous, it becomes very safe and effecient as a fogging application. Its the only way I go, and Ive been running Nitrous for over 20 years. Propane is 114 octane, and no chance of a puddle. You can dial in your A/F mixture with the turn of a screw" And they then showed pix of both there SRT-10 Viper and Lamborgini 6.0 on nitrous with a propane tank.
