pilot bearing

[username]

Does anybody have the OD for a 1uz pilot bearing.
The crank is behind the mounting plate on my engine stand and I just assume leave it on the stand unless nobody has the number available.
thanks in advance

 

[SprinterTRD]

I think its 40mm, a 6001 bearing fits The same as a toyota 4age if you are using a supra gearbox

 

[username]

Thanks sprinterTRD,

I will be using a porsche 951 geabbox that uses a seperated clutch/bellhousing assemble from the tranny.
The OD of the spline is .575" (14.6mm); also the ID of the pilot bearing...

So, sounds like I need to part out a 14.6mm ID, 40mm OD pilot bearing...

thanks

 

[Lambo]

Hi Username, if you have a look at a posting on the 21/02/05 under v8 drivetrain i posted a few pics of my Audi 016 to 1uz it shows pics of the adapter from the rear of the crank to the Spigot bearing i used and the bearing number.
Best Regards
Lambo