I took out the plugs, both banks were wet. Got them clean and fired the engine and it ran for about a minute or two at 500rpm every other time Ive tried to fire it it runs at about 1100rpm then dies.
Codes after reset are now 27, 29, it had 31 but it went away, and 71. I have EGR deleted. I have to get the o2 sensors back in and see if those codes go away. I ordered new maf connector pigtail because mine is cracked and I’m sure the connection is off. Cleaned the plugs up and maf sensor so hopefully new connector helps with my rich idle.
Codes after reset are now 27, 29, it had 31 but it went away, and 71. I have EGR deleted. I have to get the o2 sensors back in and see if those codes go away. I ordered new maf connector pigtail because mine is cracked and I’m sure the connection is off. Cleaned the plugs up and maf sensor so hopefully new connector helps with my rich idle.
