HQLex
New Member
- Messages
- 16
- Location
- Newcastle,NSW,Australia
Hi,
Checked coils and Igniters and they have the ign 12V, also checked that Igt1, Igt2, Igf1 and Igf2 have continuity back to the ECU.
Check the diagnostics, in normal mode it shows no fault just the continuous flash and in test mode it shows code 42, which from reading the Auto faults relates to fault in the speed sensors or harness (I think this has come up since I dont have the ECT connected) but I cant see this not allowing spark but still allowing injector to pulse.
Any ideas on checking the Igt1, Igt2 signal from the ECU, or testing the ignitors.
Checked coils and Igniters and they have the ign 12V, also checked that Igt1, Igt2, Igf1 and Igf2 have continuity back to the ECU.
Check the diagnostics, in normal mode it shows no fault just the continuous flash and in test mode it shows code 42, which from reading the Auto faults relates to fault in the speed sensors or harness (I think this has come up since I dont have the ECT connected) but I cant see this not allowing spark but still allowing injector to pulse.
Any ideas on checking the Igt1, Igt2 signal from the ECU, or testing the ignitors.