Need help on sensor identification

[brawn4x4]

Hi Guys
Trying to finish off a motor and not certain I have everything.

Can you have a look at the attached pics and let me know whats what?

Thanks,

Colin
[email protected]

 

[elhsupra]

ozzie-001.jpg looks like where the EGR pipe from the exhaust manifold connects to the intake manifold It looks like from the other pic that you are not running an EGR so don't worry about it.

 

[brawn4x4]

Thanks for the EGR, will blank off.

Any ideas on where the other end of that vac hose goes?

Ta,

Colin

 

[Peewee]

Power steering idle up valve. On the side of the pump.

 

[Zuffen]

Colin,

The EGR is blanked off inside.

You don't need to do anything with it.

The large hose goes to the power steering pump to idle the engine up when turning the wheel.

The small hose goes to the fuel pressure regulator.

 

[brawn4x4]

Thanks for that,

Have checked it and the EGR is blanked, the small to the pfuel press but the larger one, does it go to the steering pump of box as I cant see anything on the pump and it heads to the drivers side of motor?

Thanks,

Colin

 

[Peewee]

Pump........

 

[Peewee]

There is a little screw in valve (black plastic) with 2 prongs on it, under the resevior.
They normally get snapped off.

One of these 2 prongs is for the hose to the manifold, the other is for the hose to the intake piping.