camshaft guy
New Member
- Messages
- 10
- Location
- Christchurch NZ
We have been modifying these heads for a long time and we are up to 300cfm through the intake port @.500"v/l tested at 28"
but port flow numbers don't mean too much, you have to match the port flow and velocity to what the desired HP and RPM range is going to be. you also need to match intake and exhaust runner lengths and cam spec. the whole deal needs to work together as a package.
but port flow numbers don't mean too much, you have to match the port flow and velocity to what the desired HP and RPM range is going to be. you also need to match intake and exhaust runner lengths and cam spec. the whole deal needs to work together as a package.