S Sprint32 New Member Messages 6 Location Townsville Mar 9, 2007 #1 I've heard people say that the cylinder head sealing becomes a problem pretty early on in the game. Is this true? If so, what power level are we looking at, and what's some suggestion's to fix it?
I've heard people say that the cylinder head sealing becomes a problem pretty early on in the game. Is this true? If so, what power level are we looking at, and what's some suggestion's to fix it?
ToranaJudd Member Messages 134 Location Holsworthy, NSW, Australia Mar 9, 2007 #2 Unsure on what pressures/power, but you can "O-Ring" the block. This involves machining on the mounting surface around each cylinder.. Judd.
Unsure on what pressures/power, but you can "O-Ring" the block. This involves machining on the mounting surface around each cylinder.. Judd.
Zuffen Super Moderator Staff member Messages 5,631 Location Sydney, Australia Mar 9, 2007 #3 ARP studs and Cometic headgaskets will see well into the 700hp range or getting close to 20lb of boost.
ARP studs and Cometic headgaskets will see well into the 700hp range or getting close to 20lb of boost.