1UZFE Matt
Member
- Messages
- 72
- Location
- Perth WA
I have a scanner at last. Some photos from about 2 years ago!
Extractors I made using the original crown exhaust flanges.
They seem to work OK, I dynoed 216hp/161kw with stock crown ecu.
Regards
Matt.
Sorry if this is ment to be in the exhaust forum.
Extractors I made using the original crown exhaust flanges.
They seem to work OK, I dynoed 216hp/161kw with stock crown ecu.
Regards
Matt.
Sorry if this is ment to be in the exhaust forum.
