Quadcob
Member
- Messages
- 110
- Location
- Ipswich, Qld
Just completed the wiring of the wiring looms in a ICV I am building and it started pretty well first go. They only problem I have is that I can not get the fuel pump to work through the ECU. I followed the drawings that are available from this site.
The drawing I used has the has the fuel pump relay powered(ve+) from the ECU. The other drawing from this site I checked has the ECU as the ve- from the relay.
Before I start stripping the down the harness and rewiring it can anyone who has wired a motor from a Crown and used its ECU to control the fuel pump tell me how they wired it in.
Thanks
Warren
The drawing I used has the has the fuel pump relay powered(ve+) from the ECU. The other drawing from this site I checked has the ECU as the ve- from the relay.
Before I start stripping the down the harness and rewiring it can anyone who has wired a motor from a Crown and used its ECU to control the fuel pump tell me how they wired it in.
Thanks
Warren