Personally... It's not like you guys are asking for some ungodly lift where you need an extra 40 thou on the shim, so it's pretty much a non issue for me.
Not the best example, but the best I can do is on my 3vz-fe, the stock adjusting shims range from 2.5mm - 3.3mm thick.
Depending on where my engine would fall needing a valve adjustment (Which it does). I could make up half, if not all the adjustment I would need just by the OEM shims.
Not the best example, but the best I can do is on my 3vz-fe, the stock adjusting shims range from 2.5mm - 3.3mm thick.
Depending on where my engine would fall needing a valve adjustment (Which it does). I could make up half, if not all the adjustment I would need just by the OEM shims.