93 us spec ls400 wiring diagram

The 1UZFE EGR Delete Kit is available for sale here.

ls1rx7

New Member
Messages
24
Location
south
ok i finally got the diagram but im not real good at reading them, i am using ls400 motor and trans in a starion, i want to use ls400 power steering pump and ac, so what all can i cut out of the ecu harness that i will not need i have the whole diagram but i dont know how to post it, its pdf file 4.99mb
 
Thanks LS1RX7 your diagram did correct a couple of my mistakes, i've hosted is for all but i only have limited bandwidth so please right click and save target as.

please ignore the above link.

http://uk.share.geocities.com/[email protected]/93_lexus_ls400_complete.pdf is a pdf of the full 93 ls400 wiring (courtesy of LS1RX7).

http://uk.geocities.com/[email protected]/ecu_plugs_diagram.jpg
This is the corrected ecu plug diagram. I drew this on AutoCAD so i could print each plug out full size a3 for my garage wall. This is a high (ish) res jpeg of the cad drawing.

I personally am not too up on the ac but someone will be able to help you with that no doubt.

As for the engine and box, most things are needed, the egr can be deleted if you have it (but only if the law allows it) check the egr delete threads on this forum.

check this thread in particular-

http://lextreme.com/forums/showthread.php?t=4435

are you repairing an existing loom/cut loom or are you intending to build one from scratch?

As for help on understanding wiring diagrams i recommend printing out this:-

http://www.autoshop101.com/forms/h09e.pdf

Hope this helps and good luck and thanks.
 
i have the whole car, i dont have smog laws here, i found the diagram on a website for $12.00, ill post the site in a bit, im not real good with wiring so any help would be great
 


Top