I think a similar base formula as Fopar on here might be the way to go he is getting 1200hp out of what is mostly a boosted stock engine
http://lextreme.com/forums/showthread.php?t=13376
http://lextreme.com/forums/showthread.php?t=13376
10000rpm 1UZ
- Thread starter fugly
- Start date
The 1UZFE EGR Delete Kit is available for sale here.
Mostly stock? ORLY? It's about as built as you'd do a UZ......not that it isn't an impressive performer evn still.
With a "burnout type engine" .. I would limit power to 7 to 800 h.p !!
Should have enough torque ...
Burnout engines need to be VERY durable ..
Fit the BIGGEST cooling system you possibly can...
Set rev limit and don't change it !!!
stock heads with work
stock crank
stock valves
he just did
cams
rods
pistons
fueling
boost
that is impressive for what his achieved
LOL show me a built Toyota engine that doesn't use stock block and crank
That's the biggest 'just' list I have ever seen. If there were less bits from Toyota it wouldn't actually be a 1UZ :tongue:
Can't decide if you only have pushrods experience or no experience at all?
And no one has said it's not impressive, quite the opposite...those guys know how to build engines no question.
Lol...
Coughed out my coffee..
JustenGT8
New Member
Mostly stock? ORLY? It's about as built as you'd do a UZ......not that it isn't an impressive performer evn still.
XR8tt
Active Member
Not wrong !!!
With a "burnout type engine" .. I would limit power to 7 to 800 h.p !!
Should have enough torque ...
Burnout engines need to be VERY durable ..
Fit the BIGGEST cooling system you possibly can...
Set rev limit and don't change it !!!
Last edited:
stock block
stock heads with work
stock crank
stock valves
he just did
cams
rods
pistons
fueling
boost
that is impressive for what his achieved
JustenGT8
New Member
LOL show me a built Toyota engine that doesn't use stock block and crank
That's the biggest 'just' list I have ever seen. If there were less bits from Toyota it wouldn't actually be a 1UZ :tongue:
Can't decide if you only have pushrods experience or no experience at all?
And no one has said it's not impressive, quite the opposite...those guys know how to build engines no question.
ash
New Member
LOL show me a built Toyota engine that doesn't use stock block and crank
That's the biggest 'just' list I have ever seen. If there were less bits from Toyota it wouldn't actually be a 1UZ :tongue:
Can't decide if you only have pushrods experience or no experience at all?
And no one has said it's not impressive, quite the opposite...those guys know how to build engines no question.
Lol...
Coughed out my coffee..
