Connector id help?

The 1UZFE EGR Delete Kit is available for sale here.

MWP

New Member
Messages
364
Location
Adelaide, South Australia
Hi all,

There are a couple of connectors/plugs on my 1UZ (UCF11) loom that i cant identify.

Can you guys help??

First are these two (#1 & #2) that are found at the end of the LHS injector loom under where the diag connector is mounted.

img7240editwp8.jpg

#1 - ?????
#2 - ?????

Next are these which are on the auto trans section of the loom.

img7243edityb3.jpg

#1 - ?????
#2 - ?????
#3 - ?????
#4 - ?????
#5 - ?????

Thanks in advance for any help!!!
 
the 1st pic of the 6 and 4 pin plugs should join to the cam/crank harness that runs down front of engine


the auto plugs go in this order from front of box to rear

front overdrive clutch speed 2 pin
inhibitor plug 9 pin
solenoid plug 6 pin
output shaft speed sensor 2 pin
speedometer speedo sensor 3 pin
 


Top