i have the plugs u need
but the thransmission section is not part of that 26 pin dash plug
the wiring that goes to the transmission is part fo the main enigne harness
i would have al the plugs u need but the length of the wires on the plugs would be short
so u would have to figure out which wires go where and lengthen them and also colours will not match up
on the trans u have a 8 or 10 pin plug for the inhibitor
a 2 pin plug for front converter speed signal
a 2 pin plug for the back output shaft sensor
a 3 or 6 or 8 pin plug for the solenoid plug
and a 3 pin plug for the dash speedo sensor