Boyscout
New Member
- Messages
- 34
- Location
- Edmonton, AB Canada
this is for a 1991 Celsior/LS400
ok, I bought a new pioneer GPS unit and the "87+ toyota" wiring kit. Everythng goes together good, except there was nothing to wire in the connector for the fatory amp/sub.
my car originally had an aftermarket unit when i got it. there was this little 'box' that was wired into the power, ground, and all 4 speakers. the other connector on the 'box' fit into the connector for the amp. the only wire from the 'box' is a blue one, that i dont know where to hook it. I already have the blue wire from the wiring kit hooked to the blue wire on the deck.
So i hooked that up and i still hear nothing out of the subwoofer.
How do i check that the amp is not blown?
Should i splice the blue wire (remote??) into the blue wire on the deck?
thanks.
I can take pictres if needed.
ok, I bought a new pioneer GPS unit and the "87+ toyota" wiring kit. Everythng goes together good, except there was nothing to wire in the connector for the fatory amp/sub.
my car originally had an aftermarket unit when i got it. there was this little 'box' that was wired into the power, ground, and all 4 speakers. the other connector on the 'box' fit into the connector for the amp. the only wire from the 'box' is a blue one, that i dont know where to hook it. I already have the blue wire from the wiring kit hooked to the blue wire on the deck.
So i hooked that up and i still hear nothing out of the subwoofer.
How do i check that the amp is not blown?
Should i splice the blue wire (remote??) into the blue wire on the deck?
thanks.
I can take pictres if needed.
