Lambo
Moderator
- Messages
- 463
- Location
- Auckland New Zealand
I have this set of wheels that came on my donor uuz31 they are 16 x 8 /50 i'm trying to work out the offset of them and thought the 50 was it, when i measure from outside to flange i get 65mm and from inside i get 165mm so i'm confused, i have attached a picture as i suspect the wheels i have are not the correct ones they are toyota but i suspect they are most likely a FWD wheel, which must have made driving the car interesting to say the least any thoughts on what i have. And would anyone know the correct offset for this car.
Best Regards
Lambo
Best Regards
Lambo