Wanted Wanted- Rear sump, pickup, pan.

[XT-1]

like the thread title says I need a rear sump for a 2UZFE (all will work from what I have read) I have the front sump to trade. the oil pan is dented -I can replace if you want. will pay shipping both ways.

 

[jjb511]

I'm interested in your front sump.

My motor is a '92 SC400. Please send pic of your set-up. I will trade rear sump upper and lower pan, pick-up, and dipstick assy (tube and dipstick). Do you have all the same components?

Thanks
JJB

 

[XT-1]

I have a newer 2002 tundra 2uz, which the sump is interchangeable with the 1uz(there is a thread that shows this, somehwere) just curious why do some guys want the front sump? I need the rear sump because it is in a land cuirser and i need clearnce plus the fact I need the sump in the rear like most 4wds have them in the rear.the pan iant dented bad at all, I can send you pics of it. it is definately usable if not we can work soemthing out. everything else is shiny new.and yes I have the same parts you want to swap, just a front sump instead. let me know

 

[jjb511]

I'm putting my set-up in a '89 cressida. The front sump is needed to clear the crossmember. Let me know how you want to work this swap.

Thanks
JJB

 

[XT-1]

SSSHHHHEEEEIT!!!, is that the motor you are putting in? 2UZ? I see a SC and I assume it is an 4.7. PM me your # and tell when a good time to call is. *B*

 

[Lextreme II]

Here is a picture of 2uzfe with SC400 (rear sump) Its a "almost" direct fit.


Interesting that the picture (enegine on the stand) above is a SC400 shortblock with 2uzfe heads and a TRD supercharger.

 

[XT-1]

when you say almost.... what is "almost" ?
that is a rear sump in the pic right?

wow, that is an 1uz with 2uz heads supercharged.... nice (arent the 1uz heads better?)

 

[aliga]

xt-1, i have a rear sump from a sc4 if you need it.