BLOWN EA
New Member
- Messages
- 254
- Location
- AUSTRALIA perth wa
hi there guys looking at getting the project under way sooner rather then later. it will be twin turbo set up same as what i have in the car now. need as much info on the bottem end of the 1uzfe like week spots and any other stuff that you may know off.
need a good set of rods and pistons for it what brands i need help on this
compresion ratio 8.5 or 9.5
will run it on methanol or e85 fuel
i have
16 X 1600cc injectors
msd ignition same as is in car now
heads are done
cometic gaskets
need a good set of rods and pistons for it what brands i need help on this
compresion ratio 8.5 or 9.5
will run it on methanol or e85 fuel
i have
16 X 1600cc injectors
msd ignition same as is in car now
heads are done
cometic gaskets