Wanted V8 R154 bell housing

[Brad Bedell]

Time has come to start rounding up the manual conversion bits for my Sportcross.

Anyone have one they want to let go? If not, who sells a nice piece with all the conversion parts? I'm looking for a well engineered solution (oem like) more importantly than 'cheap'. I might consider a V160 solution, but I may need an adapter plate for that.

-Brad

 

[Lextreme II]

You might want to contat Neil from Rushimports.com.au

 

[Brad Bedell]

I found this while looking around, not sure if it's still a valid company or not as there's a bunch of broken links. http://www.monster-performance.com/modules/shop/

 

[gloverman]

We can get them in NZ - I have one in stock for a customer that I can photograph - Will try this week Cheers

 

[Zuffen]

Brad,

If Gloverman recommends a part use it.

He's an upfront straight up guy.

Forgive him for being a KIWI he can't help it he was born that way

 

[v8soarer_1991]

have a look at bullet cars

http://www.bulletcars.com/parts-services/gearbox-conversion-kits/

 

[4000GT]

www.a1turbos.co.nz

Those guys sell them, I got mine off them. With the current exchange rate, hard to beat.

 

[arkannot86]

i dunno if its any interest to you but I have a R154 w/ 1UZ auto bellhousing adapter. Bellhousing shown on the tranny is a junk 7M one. $850

 

[4000GT]

Is a R154 to 1UZ adapter plate going for USD850 these days?

 

[N8]

Is a R154 to 1UZ adapter plate going for USD850 these days?

I believe he's selling the trans with the adapter & 1UZ bell for $850, unless I misunderstood.

 

[200sx-v8]

I have tried bellhousings from Dellow and from Castlemania rod shop. Both is ok, but the kit I got from castlemania the last time was very impressive. It included all bolts, and bits. Even a tube to extend the shaft that the thrust bearing slides on. The bellhousing itself and the fork from castlemania looks alot better than the dellow stuff.

 

[arkannot86]

sorry if it wasnt clear. Im selling the tranny & the adapter for $850

 

[bigdaddeywalt]

I have a CRS Bellhousing complete kit in the for sale section. check it out and if ur interested u can pm me. Thanks