Been having some strange problems out of my tranny. The tranny engages fine when the car is first started. It'll shift fine for a bout 5 miles, then nothing. No transmission action at all. Been wanting to swap out the tc for one of lex's stalled models anyway, so I did that. While I was there I replaced the oil pump since the bearings were looking kind of rough. Had the transmission looked through by a buddy who works for a trans shop and he said everything else looks straight. Put it all back together and the same problem's still there. Thinking maybe ECU? I'm open to all suggestions. Like I said, the only time the transmission engages at all is within the first few miles of driving, then nothing. Shut the car off for about ten seconds, start it back up, and the trans engages for another few miles. This is my first "newer model" project, so I'm still getting acquainted with the idea of working out moving part problems vs computer problems. Trying to get an understanding of how much the computer actually controls the tranny and how to fix this problem.