milnersXcoupe
New Member
- Messages
- 95
- Location
- new paltz, new york . USA
Type: Toyota NASCAR V8
Displacement: 358 Cu.in. = 5866.568912 CC
Power: 675 Horsepower at the Rear Wheel
Induction: Normally Aspirated with 390 cfm Carburetor
Bore: 4.185 Inches = 106.299 mm
Stroke: 3.250 Inches = 82.55 mm
Compression Ratio: 12.0:1
Fuel: Sunoco Racing Gasoline
Question is:
can we punch out the 5.7 bore to 106.299 mm from current 94 mm ??
Displacement: 358 Cu.in. = 5866.568912 CC
Power: 675 Horsepower at the Rear Wheel
Induction: Normally Aspirated with 390 cfm Carburetor
Bore: 4.185 Inches = 106.299 mm
Stroke: 3.250 Inches = 82.55 mm
Compression Ratio: 12.0:1
Fuel: Sunoco Racing Gasoline
Question is:
can we punch out the 5.7 bore to 106.299 mm from current 94 mm ??