throttle position sensor

[2gtsvette]

would any one know what wire on the TPS is the voltage output lead one the 1uz?

 

[madmont]

does this help?

 

[2gtsvette]

um i dont see anything..

 

[MightyAl]

pin 1 brown - ground
pin 2 red - idle switch
pin 3 yellow - voltage out
pin 4 blue-red - power

Hope that helps

 

[madmont]

It is a pain not being able to see the pic is it not? I have to log off then go to the page , follow the link , and then log on to see the picture

 

[2gtsvette]

i installed a zex kit but i am still unable to find a suitable tps sensor wire.. and a nice fuel connection.. any help will be great.!

 

[madmont]

try this
http://i183.photobucket.com/albums/x306/madmont1/tps.jpg

 

[Red Supra]

connect to pin3

 

[2gtsvette]

which tps sensor should i use the first one from on the right? or the one on the left?

 

[gloverman]

Use the one closest to the plenum - opposite the throttle linkage. The other one is for the traction control. Use a multi meter and measure the voltages - the wire you want will have a voltage that ranges from .5volt to around 5volts when moving the throttle. Cheers

 

[2gtsvette]

thank you.


I have another question, For a fuel supply line can i use the high pressure line (by the brake booster) or should i drill and tap the rail or banjo (FPR) ?