dvincent
New Member
- Messages
- 25
- Location
- Dallas area Texas
I am in the process of fixing wear and tear items on recently purchased 1993 SC300 with a USDM Supra 2jgte conversion(currently has a single turbo).
I have a intermittent rattling noise from the front passenger side diagnosed to be coming from the original 15 year old strut mount. This obviously will be replaced--however my question is with what? 3 year old KYB gas shocks in good working order and a Eicbach 1" lower springs are in place.
Question: Should I replace with OEM SC300 strut mounts vs Supra strut mounts. I have already done the searches and know that most Supra parts will direct fit the sc300 and sc400. What I would really looking for is what has worked well for people who have already have done this. I see the replacement KYB mounts are relatively cheap--anybody use these or know of any problems with these?
If the supra mounts fit (please correct me if I am wrong) they should be the best choice due to longer studs that should allow for the addition of a tower sway bar (once again correct me if I am wrong).
Since I am at it--I might as well ask about the control arms options.
Option 1: Replace bushes with Andrew Vlamos (Australia) rubber ones to maintain Lexus luxury ride.
Option 2: Replace with Supra control arms. People who have done this--does it make for a harsh ride? I have never been in a Supra.
Option 3: Open to recommendations. Thanks.
I have a intermittent rattling noise from the front passenger side diagnosed to be coming from the original 15 year old strut mount. This obviously will be replaced--however my question is with what? 3 year old KYB gas shocks in good working order and a Eicbach 1" lower springs are in place.
Question: Should I replace with OEM SC300 strut mounts vs Supra strut mounts. I have already done the searches and know that most Supra parts will direct fit the sc300 and sc400. What I would really looking for is what has worked well for people who have already have done this. I see the replacement KYB mounts are relatively cheap--anybody use these or know of any problems with these?
If the supra mounts fit (please correct me if I am wrong) they should be the best choice due to longer studs that should allow for the addition of a tower sway bar (once again correct me if I am wrong).
Since I am at it--I might as well ask about the control arms options.
Option 1: Replace bushes with Andrew Vlamos (Australia) rubber ones to maintain Lexus luxury ride.
Option 2: Replace with Supra control arms. People who have done this--does it make for a harsh ride? I have never been in a Supra.
Option 3: Open to recommendations. Thanks.