Lextreme II
Active Member
No! if you are thinking of seeing HOT female supermodels then u are wrong. I am talking about the Super Model below. We just finished an engine for a customer in East Coast. He had a TRD Supercharger in his Tundra and thrown few rods and damaged the block and heads. So he email me to see if I can help him. He would like to keep the supercharger in his truck and would like to beef up the engine instead of replace it with another oem longblock.
This longblock have:
* Lextreme Lightening Forged H Beam Rods
* 9.5:1 Forged pistons
* ARP studs all over
* Complete valve job
* Mild port heads
* ACL main, thrust and rods bearings
* Assembly and balanced with few other goodies
* We also donated the whole timing parts (belt, water pump, pullies and tensioner)
This engine will bring many smiles to his face in the future.
This longblock have:
* Lextreme Lightening Forged H Beam Rods
* 9.5:1 Forged pistons
* ARP studs all over
* Complete valve job
* Mild port heads
* ACL main, thrust and rods bearings
* Assembly and balanced with few other goodies
* We also donated the whole timing parts (belt, water pump, pullies and tensioner)
This engine will bring many smiles to his face in the future.
) H-m-m-m-m seems a waste if all he is going to try is the TRD supercharger, all I've been able to get out of just the TRD is around 8-9 lbs of boost and that is with a 5.9 inch crank pulley. That engine just begs for a nice GT40R eh?
