Stock Roid Bolts?

[pogoism9]

I searched but found nothing. Are the stock rod bolts torque to yield? Or are they reusable

 

[XR8tt]

I think they are TTT .. Generally if they tapper from thread to head? They are TTT..
IMO..Replace them anyway ...

 

[Zuffen]

ARP sell bolts that fit.

This site can supply them at better prices than most of us can buy them at.

 

[XR8tt]

Sorry .. I was reffering to head bolts in above post...
If its a std unmodded overhaul ?
I wouldn't bother, even when stressed with forced induction its the rods themselves that let go..
Depends on build ??

 

[JustenGT8]

Sorry you have roids mate, that's a real bummer (pun intended)

 

[pogoism9]

its a standard rebuild.

 

[XR8tt]

its a standard rebuild.

Original will do fine...

 

[Zuffen]

The Lextreme ARP price would be cheaper than OEM bolts.

 

[pogoism9]

ok, so are the OEM bolts reusable or do I need to purchase new ones?

 

[XR8tt]

Original will do fine...

If its a std rebuild.. If it means you can't sleep too easy at night etc??
Replace them!! They are NOT the weakest link...
Imo the old bolts will do fine if power levels are going to be roughly std..