OK lextreme readers. this build was ment to be completed before Christmas but i keep changing my mind about stuff now this is the latest development. twin turbo ( t3t4) or single garret thing i have, here are the turbo details of each.
Garret monster.=
inlet turbine 55mm
outlet turbine 60 mm
compressor inlet size =90 mm
hot side outlet 90mm
internal waste gate unknown setting, no shaft play, has been balance checked.
compressor housing markings garrett ec-1 M67 scania ( did come off a truck)
no a/r no trim
hot side markings= M3 a/r1-18
t3t4 turbos
ebay
2.5'' inlet
2.5'' outlet.
50 a/r compressor
.63 a/r turbine
.57 trim
so some one give me the answer. because i cant
Garret monster.=
inlet turbine 55mm
outlet turbine 60 mm
compressor inlet size =90 mm
hot side outlet 90mm
internal waste gate unknown setting, no shaft play, has been balance checked.
compressor housing markings garrett ec-1 M67 scania ( did come off a truck)
no a/r no trim
hot side markings= M3 a/r1-18
t3t4 turbos
ebay
2.5'' inlet
2.5'' outlet.
50 a/r compressor
.63 a/r turbine
.57 trim
so some one give me the answer. because i cant