People from oz

[White ls400]

Just wondering what lowered suspension people in Australia are using... Only after better handling not looks

 

[White ls400]

Can anyone point me in the direction of this answer will 95 to 2000 model ls400 coilovers fit in a 1990 model. Because i can only find listings in Australia for 95 onwards

 

[rms]

Can't answer your question re '95/2000 LS, but when you say better? handling, what do you mean ?

 

[Jake Breyck]

Im just wondering, why does it have to be people from Austraila? do the rest of us not have valid oppions?

 

[cribbj]

He may be interested in what works and is available there, since he's in Oz too.

 

[White ls400]

What i mean by better handling is, less bodyroll and less tyre screech around corners because at the moment its pretty well dangerous too take a corner with any decent speed... The reason i am asking about australia only is, i have no intentions ordering from outside australia, and at the moment i cant find coilovers for my model 1990 only 95 onwards, Also the reason I am looking at coilovers is because the only brand i can find replacement struts in is Kyb and I would like to have at least two options

 

[Death By Bass]

I had.... Supra Rears in the front, with 5cm longer shafts, and Supra rears in the Rear, with 10cm? longer shafts...

however, I strongly suggest against sourcing them from the same place I did

 

[White ls400]

How did you lengthen the shafts or could your order them that way... If its fairly in depth feel free to pm me

 

[Death By Bass]

How did you lengthen the shafts or could your order them that way... If its fairly in depth feel free to pm me

they were ordered that way.... my lengths may be wrong though...

and the celsior really shouldn't have coil overs!

 

[puredrifter]

95-00 LS400(celsior) specific shocks or coilovers will not work (properly, if at all) on 89-94 models as the shaft length is too long.

89-94 specific coilovers WILL work on 95-00 but the car will never be able to get back to the Original height. (JIC FLT-A2s for example, on a 95-00 at their highest setting, are still ~1" lower than stock)