Need HELP..... Ignition issues.

[Armyman2445]

Ok. This is pretty funny and weird to me. After a tune up (cap's, rotor buttons, coils, wires, and plugs. I did the driver side and everything was great. I did the passenger side and it runs like crap. I pulled all the plugs all the plugs on the driver side and all looked good. Pulled them from the passenger side and all were soaked in gas. Ive checked the firing order 10x. It doesnt make sense b/c you distrubitor fires 2 plugs on each side. But one hole side of the motor isnt firing. Both Coils are sparking (I got lite up on both of them. Ive checked spark at all the plug wires and they have spark... im at my whits end. Does any body have any suggestions????

 

[sideshow]

maybe u fitted the rotor button 180 degrees out
easy to do if u have never done it before

 

[Armyman2445]

I went out and looked. The buttons are slotted and only fit one way.

 

[sideshow]

ok cool
ive had custoemrs fit them wrong and break that slot

try disconnecting one coil plug at a time while engine is running

if it makes a difference then u know that side is working
if it doesnt make much differnece then its not working
sometimes u have to think in reverse
while motor is running pull a spark lead of one at a time use correct tools
and se ewhich cylinders are working and which are not
if some cylinders dont make any difference then this might steer u in right direction